35X11.50R17 Tire Size

35X11.50R17 Tires: Narrow Radial 35-Inch Tire Size Explained

35X11.50R17 is a radial flotation tire size describing a tire approximately 35 inches tall, about 11.5 inches wide, and designed for a 17-inch wheel. The "R" identifies radial construction.

This page covers the 35X11.50R17 radial size for drivers searching for a new radial tire to purchase in this diameter and width. If you have seen the dash-style notation 35x11.50-17 on an existing tire sidewall or in older documentation, see 35x11.50-17 tires.

35X11.50R17 size is commonly searched by drivers wanting a narrower 35-inch radial tire that maintains substantial ground clearance without the additional width of traditional 35x12.50 flotation setups.

35X11.50R17 Size Quick Specs

• Approximate overall diameter: 35.0"
• Approximate section width: 11.5"
• Approximate sidewall height: 9.0"
• Wheel diameter: 17"
• Typical approved rim width range: 7.5–10.0" (verify with your specific tire manufacturer)
• Construction category: radial

What 35X11.50R17 Means

• 35 = approximate overall tire diameter in inches
• 11.50 = approximate tire width in inches
• R = radial construction
• 17 = wheel diameter in inches

Unlike metric off-road sizing, 35X11.50R17. flotation radial sizing directly communicates the tire's approximate height and width without requiring aspect-ratio calculations.

35X11.50R17 vs 35x11.50-17

35X11.50R17 and 35x11.50-17 are closely related in dimensions, but the construction designation differs.

35X11.50R17 specifically identifies:

• Radial casing construction
• Modern highway-oriented tire behavior
• Improved heat management at sustained speeds
• More consistent road-contact characteristics

The dash-style 35x11.50-17 notation is a legacy format that does not itself confirm radial construction. Most tires sold today in that sizing use radial construction, but always verify with the specific manufacturer's specification sheet.

Why Drivers Search for Narrow 35-Inch Radial Tires

One of the most common reasons drivers search for 35X11.50R17 tires is to gain 35-inch ride height while avoiding the clearance demands of wider 12.50-inch flotation tires.

Narrower radial 35-inch tires may help:

• Reduce fender and steering rub
• Improve fitment on moderate wheel offsets
• Maintain lighter steering response
• Reduce rolling resistance compared with wider tires
• Improve directional tracking in rain and wet conditions

Are 35X11.50R17 Tires Good for Daily Driving?

Compared with wider flotation tires, narrower radial 35-inch tires, such as 35X11.50R17, are often easier to manage on daily-driven trucks and SUVs. The reduced section width may improve highway stability, steering response, and wet-weather tracking compared with oversized wide flotation setups. However, ride quality, road noise, and winter behavior still depend heavily on tread design and tire category.

Where 35X11.50R17 Tires Are Usually Used

• Daily-driven off-road trucks
• Overland-style SUV builds
• Trail-oriented 4x4 setups
• Vehicles needing narrower 35-inch radial tires
• Mixed highway and off-road applications

35X11.50R17 vs 35x12.50R17

35X11.50R17 tires are approximately 1 inch narrower than 35x12.50R17 tires while maintaining similar overall diameter.

• 35X11.50R17 width: approximately 11.5"
• 35x12.50R17 width: approximately 12.5"
• Narrower tires may improve fitment clearance
• Wider tires may improve flotation in loose terrain

The narrower configuration is commonly selected by drivers prioritizing clearance and steering behavior over maximum footprint width.