Bridgestone M760 Ecopia
The Bridgestone M760 Ecopia is a commercial radial drive tire designed for fleets that split time between regional routes, long-haul runs, and vocational, mixed-service work. Its open-shoulder tread layout is intended to support traction on variable surfaces while maintaining the on-road manners operators expect from a drive-position tire. If you need a model-focused option for 22.5-inch applications, this page covers intended use, fitment, and what to compare before choosing the M760 Ecopia.
Bridgestone M760 Ecopia Specs and Design Overview
Bridgestone M760 Ecopia is built as a radial commercial drive tire with an open-shoulder tread pattern. Open shoulders are commonly selected on drive axles to help evacuate debris and maintain traction when conditions change across paved roads, job sites, or access roads. The casing and tread are designed for commercial service, with a focus on consistent footprint stability under load and predictable traction characteristics.
When reviewing Bridgestone M760 Ecopia specs, focus on the tread pattern type, intended service category, and the exact size designation needed for your wheels and axle rating. As with any drive tire, matching the correct size and maintaining proper inflation are central to getting consistent wear and usable service life.
Application Fit: Regional, Long-Haul, and Mixed-Service Use
The Bridgestone M760 Ecopia is commonly considered for commercial operations that blend regional service with longer highway stretches and occasional vocational, mixed-service duty. This is a typical use case when trucks leave the highway for terminals, industrial yards, construction access, or other variable-surface environments that benefit from a drive tread with more void area than a closed-shoulder highway design.
To decide if the M760 Ecopia fits your routes, think about how often your trucks encounter loose surfaces, tight turns at low speed, or frequent start and stop driving. A drive-position tire like this is generally chosen when traction needs are higher than purely highway service, but the fleet still expects stable on-road behavior.
Available Sizes and Fitment: 11R22.5 and 295/75R22.5
Bridgestone M760 Ecopia is offered in the approved 22.5-inch fitments of 11R22.5 and 295/75R22.5. While these sizes can be used in similar commercial applications, they are not automatically interchangeable on every truck. Wheel width, axle load requirements, and overall diameter differences can affect clearance, gearing, and speedometer accuracy.
When confirming fitment, match the size molded on your current tire sidewall and verify the wheel specification and vehicle requirements. If you are considering moving between 11R22.5 and 295/75R22.5, confirm that the new size maintains adequate dual spacing and does not create interference under articulation. Fitment checks are especially important on vocational trucks that see tighter turning angles and uneven surfaces.
Bridgestone M760 Ecopia Price: What Typically Affects Cost
Bridgestone M760 Ecopia price can vary based on tire size, current availability, and how the tire is sourced for your fleet. Cost differences are also commonly influenced by wheel-end configuration, order quantities, and whether you are replacing a single tire or outfitting a full drive set across multiple units.
When comparing pricing, confirm you are looking at the same exact model name, Bridgestone M760 Ecopia, and the same size designation. Also account for how the tire will be used in your operation, since mixed-service duty can change wear patterns compared with steady-state highway miles. For the most useful comparison, evaluate price alongside the correct fitment, expected route conditions, and service support for commercial applications.
Comparisons: Bridgestone M726 vs M760 Ecopia and M713 vs M760 Ecopia
Comparing Bridgestone M726 vs M760 Ecopia is usually about choosing between different drive-tire designs intended for different route demands. The right choice depends on how much mixed-service work you see, how traction-sensitive your routes are, and how much of your operation is steady highway running.
A Bridgestone M713 vs M760 Ecopia comparison often comes down to whether you want a more highway-oriented drive approach or a drive tread that is better suited to variable surfaces and vocational duty. When comparing, use consistent criteria: the exact size you need, tread pattern type, and the operating conditions your trucks see daily. Avoid basing the decision on a single factor, since fitment and service conditions drive real-world results.
Recommendations and practical tips
Bridgestone M760 Ecopia is typically chosen by commercial fleets that need a radial drive tire capable of handling regional routes, long-haul segments, and periodic vocational, mixed-service operation. It can make sense for trucks that regularly transition between highway pavement and lower-speed work areas such as yards, terminals, or access roads. It is best suited to buyers who want a model-specific option in approved 22.5-inch sizes and who prioritize correct fitment and consistent service practices.
When we recommend it:
- When your drive axle needs an open-shoulder tread for variable on-road and mixed-service conditions
- When your operation is primarily regional or long-haul but includes regular off-highway access roads and job-site approaches
- When you need Bridgestone M760 Ecopia in 11R22.5 or 295/75R22.5 for a consistent fleet specification
- When you want a commercial radial drive tire with a tread pattern oriented toward traction-focused service
When to consider other options:
- When your trucks operate almost exclusively on steady highway routes and you prefer a more highway-oriented drive design
- When your required fitment is outside the approved sizes of 11R22.5 and 295/75R22.5
- When your operation demands a different tread pattern type than an open-shoulder drive layout
Expert tips:
- Confirm the exact sidewall size and wheel specification before ordering, especially if switching between 11R22.5 and 295/75R22.5
- For best driveline behavior, replace in matched sets on the drive axle and keep overall diameters consistent across the pair
- If your routes include frequent low-speed turns and mixed surfaces, plan regular inspections to catch irregular wear early
- Document route type, load patterns, and rotation history so future replacements stay consistent across the fleet
Usage and care tips:
- Maintain inflation to the vehicle and application requirements, and recheck pressures when ambient temperatures change
- Perform routine tread and casing inspections, paying attention to cuts, impacts, and uneven wear typical of mixed-service work
- Keep wheel-end alignment and suspension components in good condition to reduce irregular wear on drive tires
- Remove debris lodged in tread areas during scheduled checks to help prevent casing damage
Choosing the Right M760 Ecopia for Your Fleet
We recommend the Bridgestone M760 Ecopia when you need a commercial radial drive tire that matches a real mix of regional miles, long-haul segments, and periodic mixed-service work. The key is selecting it for the right axle position and confirming the exact 22.5-inch size your trucks require. If your operation transitions between highway pavement and lower-speed yards, terminals, or access roads, this model is often a practical option to compare within your drive-tire shortlist.
Best fit scenarios:
- Drive-axle applications where you want an open-shoulder tread layout for variable on-road and mixed-service conditions
- Regional fleets that also run longer highway stretches and see regular start and stop driving
- Trucks that routinely enter terminals, industrial yards, or access roads where conditions change off the highway
- Fleet standardization needs in 22.5-inch fitments such as 11R22.5 or 295/75R22.5
- Buyers who want a model-specific drive tire and plan to keep service practices consistent across units
When to pause and check fitment:
- If you are switching between 11R22.5 and 295/75R22.5, confirm wheel specs, clearance, and dual spacing before ordering
- If you are replacing only one tire on a drive axle, verify the matching size and overall diameter across the set
- If your operation is almost entirely steady highway miles, confirm whether a more highway-oriented drive design is a better match
- If your required fitment is outside 11R22.5 or 295/75R22.5, confirm availability and proper application before proceeding
Why customers trust NeoTires:
- Tire experts available via chat, phone, or text to confirm size and drive-position fitment
- Practical guidance for fleets ordering matched drive sets and maintaining consistent specifications
- Clear, transparent help comparing options like M726 vs M760 Ecopia and M713 vs M760 Ecopia based on route needs
- Proactive coordination across warehouses and delivery teams to support commercial ordering timelines
Confirm Size and Drive Position Before You Buy
Send us your current sidewall size and your application details, and we will help verify whether 11R22.5 or 295/75R22.5 is the right match for your drive axle.
Actions:
Request Fleet Pricing and Multi-Tire Ordering Help
If you are outfitting one unit or standardizing across multiple trucks, we can help you build a consistent drive-axle order and coordinate delivery.
Actions:
Compare Against Your Current Drive Tire
Tell us what you run today and your route mix, and we will help you compare the M760 Ecopia to alternatives without guessing on fitment.
Actions:
