Rims not included with purchase of tires
Ironman I-301 12.00R24 L TTF 160/157K
You're viewing new Ironman I-301 Tire | 24x12.00-14 | L | Manufacturer Part No 90826.
Ironman I-301 Commercial Drive Tire
Put reliable traction and cost control to work with the Ironman I-301. Built for everyday commercial duty, it combines a durable casing with a balanced tread to deliver confident grip, stable handling, and even wear across long-haul and regional routes. The casing supports retreadability to extend total life, and the tread geometry moves water away while resisting irregular wear. Whether you run a single unit or a fleet, the I-301 delivers practical performance and value that keeps trucks moving and budgets in line.
Key Features of the Ironman I-301
The I-301 focuses on the fundamentals operators care about, durability, traction, and predictable wear. A reinforced casing manages heavy loads and supports retreading to lower cost per mile. Interlocking tread elements with dense siping improve wet-road grip and braking, while stone-resistant grooves help shield the belts on mixed highway runs. A sturdy shoulder keeps contact even, limiting cupping and feathering so the tire stays consistent over its service life.
Performance: Traction, Wear, and Fuel Efficiency
On paved routes, the Ironman I-301 delivers confident forward bite and braking. A cold-weather capable compound with ample siping keeps edges working as temperatures drop, and the stable block layout with a balanced footprint encourages even wear when alignment and inflation are correct. Deep channels and lateral notches move water to help reduce hydroplaning in heavy rain. Rolling efficiency is tuned for value to control operating costs without giving up safety, and for winter or severe service you should confirm sidewall markings and use chains or seasonal fitments where local rules require.
Available Sizes and Fitment Guidance
Popular drive sizes include 11R22.5, 295/75R22.5, and 11R24.5 in multiple load ranges. Always match the size, load index, and speed rating specified by your OEM or fleet standard. Replace in sets across an axle to prevent diameter mismatch, and confirm dual spacing when mixing brands or tread depths. If you are unsure, check the OE placard and talk with your service provider for a precise fit.
Pricing, Value, and How to Buy
The Ironman I-301 is priced for value, delivering dependable performance without the premium tag. A retreadable casing and even-wear design help improve total cost of ownership. Review current pricing by size and load range, then add mounting, balancing, valve stems, and disposal at checkout. Fleets can request volume pricing or scheduled replacement programs, and you will get the best return by pairing the purchase with rotations, inflation checks, and alignment.
Maintenance Tips for Maximum Life
Set the correct cold inflation pressure for the load and ambient temperature. Underinflation builds heat and chews shoulders, while overinflation shrinks the contact patch and hurts traction. Rotate and flip per your service program, keep axles aligned, and look for early signs of cupping or heel-toe. Use calibrated torque and re-torque after initial service, clear stones from the grooves, and plan retreading when tread depth reaches your fleet threshold.
Comparison: I-301 vs Other Ironman Options
In the Ironman lineup, the I-301 targets value-focused drive applications with a balanced approach to traction and wear. If you run mostly wet or mixed regional routes and want a more open lug for bite, consider drive patterns in the family that favor wider channels. For steer duty, choose a rib pattern tuned for straight-line stability and wear on the front axle. Always verify position designation and performance details on the spec sheet for your exact size and load range.
I‑301 vs. Ironman I‑208 (Drive)
Both the I-301 and I-208 are drive-position options built for cost-efficient traction. The I-301 leans toward balanced wear, wet-road confidence, and casing durability for retread programs. The I-208 is often picked where operators want a more assertive lug shape for bite in regional or mixed conditions. Compare tread depth, rolling resistance, and position designation for the SKU you need, then choose the pattern that fits your route, climate, and cost-per-mile goals.
I‑301 vs. Ironman I‑109 (Steer)
The I-301 is designed for drive-axle traction and durability. The I-109 is a steer-position tire that prioritizes straight-line stability, precise handling, and resistance to irregular wear up front. These roles are not interchangeable, so always install a tire in the axle position it was built for. Many tractors pair a steer-optimized rib up front with a drive-optimized pattern on the rear tandems, matched for load range, speed rating, and tread designation.
Ironman I-301 Commercial Drive Tire
Put reliable traction and cost control to work with the Ironman I-301. Built for everyday commercial duty, it combines a durable casing with a balanced tread to deliver confident grip, stable handling, and even wear across long-haul and regional routes. The casing supports retreadability to extend total life, and the tread geometry moves water away while resisting irregular wear. Whether you run a single unit or a fleet, the I-301 delivers practical performance and value that keeps trucks moving and budgets in line.
Key Features of the Ironman I-301
The I-301 focuses on the fundamentals operators care about, durability, traction, and predictable wear. A reinforced casing manages heavy loads and supports retreading to lower cost per mile. Interlocking tread elements with dense siping improve wet-road grip and braking, while stone-resistant grooves help shield the belts on mixed highway runs. A sturdy shoulder keeps contact even, limiting cupping and feathering so the tire stays consistent over its service life.
Performance: Traction, Wear, and Fuel Efficiency
On paved routes, the Ironman I-301 delivers confident forward bite and braking. A cold-weather capable compound with ample siping keeps edges working as temperatures drop, and the stable block layout with a balanced footprint encourages even wear when alignment and inflation are correct. Deep channels and lateral notches move water to help reduce hydroplaning in heavy rain. Rolling efficiency is tuned for value to control operating costs without giving up safety, and for winter or severe service you should confirm sidewall markings and use chains or seasonal fitments where local rules require.
Available Sizes and Fitment Guidance
Popular drive sizes include 11R22.5, 295/75R22.5, and 11R24.5 in multiple load ranges. Always match the size, load index, and speed rating specified by your OEM or fleet standard. Replace in sets across an axle to prevent diameter mismatch, and confirm dual spacing when mixing brands or tread depths. If you are unsure, check the OE placard and talk with your service provider for a precise fit.
Pricing, Value, and How to Buy
The Ironman I-301 is priced for value, delivering dependable performance without the premium tag. A retreadable casing and even-wear design help improve total cost of ownership. Review current pricing by size and load range, then add mounting, balancing, valve stems, and disposal at checkout. Fleets can request volume pricing or scheduled replacement programs, and you will get the best return by pairing the purchase with rotations, inflation checks, and alignment.
Maintenance Tips for Maximum Life
Set the correct cold inflation pressure for the load and ambient temperature. Underinflation builds heat and chews shoulders, while overinflation shrinks the contact patch and hurts traction. Rotate and flip per your service program, keep axles aligned, and look for early signs of cupping or heel-toe. Use calibrated torque and re-torque after initial service, clear stones from the grooves, and plan retreading when tread depth reaches your fleet threshold.
Comparison: I-301 vs Other Ironman Options
In the Ironman lineup, the I-301 targets value-focused drive applications with a balanced approach to traction and wear. If you run mostly wet or mixed regional routes and want a more open lug for bite, consider drive patterns in the family that favor wider channels. For steer duty, choose a rib pattern tuned for straight-line stability and wear on the front axle. Always verify position designation and performance details on the spec sheet for your exact size and load range.
I‑301 vs. Ironman I‑208 (Drive)
Both the I-301 and I-208 are drive-position options built for cost-efficient traction. The I-301 leans toward balanced wear, wet-road confidence, and casing durability for retread programs. The I-208 is often picked where operators want a more assertive lug shape for bite in regional or mixed conditions. Compare tread depth, rolling resistance, and position designation for the SKU you need, then choose the pattern that fits your route, climate, and cost-per-mile goals.
I‑301 vs. Ironman I‑109 (Steer)
The I-301 is designed for drive-axle traction and durability. The I-109 is a steer-position tire that prioritizes straight-line stability, precise handling, and resistance to irregular wear up front. These roles are not interchangeable, so always install a tire in the axle position it was built for. Many tractors pair a steer-optimized rib up front with a drive-optimized pattern on the rear tandems, matched for load range, speed rating, and tread designation.
Do you have a question about I-301 12.00R24 L TTF 160/157K?
The Ironman I-301 is typically used on the drive axle for long-haul and regional service, thanks to its traction-focused tread and durable casing. Always verify the position designation on the exact SKU you plan to buy, since specifications can vary by size. Check the product details and sidewall for position, load range, and speed rating. Matching the tire to the axle, vehicle load, and route helps ensure safety, proper wear, and warranty compliance.
Common Ironman I-301 drive sizes include 11R22.5, 295/75R22.5, and 11R24.5, offered in select load ranges. Availability can vary by region and season. Confirm size, load index, and speed rating against your truck's OEM placard and maintenance records. If you run duals, verify overall diameter and dual spacing, and keep tread depth and circumference closely matched when mixing brands on the same axle.
Service life depends on load, route, climate, and maintenance. The I-301 uses a durable casing and even-wear tread geometry to support long runs and retreading, but mileage results will vary. You will get the most life by keeping cold inflation correct, rotating on schedule, maintaining alignment, and clearing trapped stones. Many fleets replace based on tread depth thresholds, then retread the casing to extend cost-per-mile advantages.
Ironman Tires is owned by Hercules Tire & Rubber, a long-standing replacement tire company. Ironman products are distributed through dealers and national retailers. Manufacturing is sourced through global partner factories that build to Ironman's specifications, including facilities in Asia. Country of origin can vary by size and batch, so check the sidewall of the tire you receive.
Ironman targets value-driven performance, with practical traction, durable casings, and retreadability at an accessible price. Premium brands may add advanced compounds, lower rolling resistance, and deeper testing that can edge out fuel economy or niche performance, at a higher cost. If dependable operation and controlled cost per mile are your priorities, the Ironman I-301 is a strong budget-minded option. For specialized needs or maximum fuel savings, compare spec sheets and total ownership costs across brands.
No. UTQG treadwear ratings apply to passenger and light-truck tires, not commercial truck TBR tires. For the Ironman I-301, focus on commercial metrics such as tread depth, load range, speed rating, recommended axle position, and retreadability. Performance and longevity depend on maintenance, route conditions, and fleet wear records. For benchmarks, compare rolling resistance classifications, casing warranties, and retread performance for the sizes you are considering.
