Order P235/60R17 tires by tire type, service description, brand, mileage warranty, availability, and current price.
Before choosing P235/60R17 tires, match the vehicle-required load index, speed rating, and any applicable load or designation requirements.
The P235/60R17 tire size has a 235-millimeter section width, a 60% aspect ratio, and is built for a 17-inch wheel diameter, giving it a calculated overall diameter of approximately 28.1 inches and a sidewall height of approximately 5.6 inches. The same numerical size is also sold under the non-P designation 235/60R17, which drops the "P" passenger-metric prefix.
The P prefix identifies P235/60R17 as a P-metric passenger tire, a designation system with its own load-index scaling, so the two versions should not be assumed interchangeable without checking the load requirements of your vehicle. Because the numerical dimensions are shared, P235/60R17 and 235/60R17 use the same section width, aspect ratio, and wheel diameter described above.
| Specification | Value |
|---|---|
| Internal Construction | Radial (R) |
| Service Description Application | P-metric (Passenger) |
| Rim Width Range | 6.5"–8.5" |
| Section Width | 235 mm (9.3 in) |
| Aspect Ratio | 60% |
| Rim Diameter | 17 in |
| Circumference | Approx. 88.3 in |
| Revolutions Per Mile | Approx. 718 |
The P235/60R17 tire size is documented in this exact size on the following vehicles:
To check whether the P235/60R17 tire size is a factory fitment for your specific vehicle, use our VIN lookup tool.
The P235/60R17 tire size is approximately 9.3 inches wide, 28.1 inches tall overall, with a sidewall approximately 5.6 inches high. For P235/60R17, the width shows about how far the tire spans from sidewall to sidewall, while the sidewall height shows how much tire sits between the 17-inch wheel and the outer tread, together adding up to the approximately 28.1-inch overall diameter.
Drivers comparing alternatives to P235/60R17 commonly research two sizes: P225/60R17 and 235/65R17. P225/60R17 keeps the same 60% aspect ratio but uses a narrower 225-millimeter width, which brings its overall diameter close enough to P235/60R17 to sit within the commonly used ±3% comparison guideline, making it worth a closer fitment look. 235/65R17 keeps the same 235-millimeter width as P235/60R17 but raises the aspect ratio to 65%, producing a noticeably taller overall diameter that falls outside that same guideline.
Either size still needs its own check against wheel width, load requirements, and vehicle clearance before being treated as a substitute for P235/60R17.
P225/60R17 has an overall diameter approximately 1.7% smaller than P235/60R17, a difference that falls within the ±3% guideline commonly used when comparing tire sizes.
235/65R17 has an overall diameter approximately 3.3% larger than P235/60R17, a difference that falls outside the ±3% guideline commonly used when comparing tire sizes.
The P235/60R17 tire size has a 235-millimeter section width, a 60% aspect ratio, and is built for a 17-inch wheel diameter, giving it a calculated overall diameter of approximately 28.1 inches and a sidewall height of approximately 5.6 inches. The same numerical size is also sold under the non-P designation 235/60R17, which drops the "P" passenger-metric prefix.
The P prefix identifies P235/60R17 as a P-metric passenger tire, a designation system with its own load-index scaling, so the two versions should not be assumed interchangeable without checking the load requirements of your vehicle. Because the numerical dimensions are shared, P235/60R17 and 235/60R17 use the same section width, aspect ratio, and wheel diameter described above.
| Specification | Value |
|---|---|
| Internal Construction | Radial (R) |
| Service Description Application | P-metric (Passenger) |
| Rim Width Range | 6.5"–8.5" |
| Section Width | 235 mm (9.3 in) |
| Aspect Ratio | 60% |
| Rim Diameter | 17 in |
| Circumference | Approx. 88.3 in |
| Revolutions Per Mile | Approx. 718 |
The P235/60R17 tire size is documented in this exact size on the following vehicles:
To check whether the P235/60R17 tire size is a factory fitment for your specific vehicle, use our VIN lookup tool.
The P235/60R17 tire size is approximately 9.3 inches wide, 28.1 inches tall overall, with a sidewall approximately 5.6 inches high. For P235/60R17, the width shows about how far the tire spans from sidewall to sidewall, while the sidewall height shows how much tire sits between the 17-inch wheel and the outer tread, together adding up to the approximately 28.1-inch overall diameter.
Drivers comparing alternatives to P235/60R17 commonly research two sizes: P225/60R17 and 235/65R17. P225/60R17 keeps the same 60% aspect ratio but uses a narrower 225-millimeter width, which brings its overall diameter close enough to P235/60R17 to sit within the commonly used ±3% comparison guideline, making it worth a closer fitment look. 235/65R17 keeps the same 235-millimeter width as P235/60R17 but raises the aspect ratio to 65%, producing a noticeably taller overall diameter that falls outside that same guideline.
Either size still needs its own check against wheel width, load requirements, and vehicle clearance before being treated as a substitute for P235/60R17.
P225/60R17 has an overall diameter approximately 1.7% smaller than P235/60R17, a difference that falls within the ±3% guideline commonly used when comparing tire sizes.
235/65R17 has an overall diameter approximately 3.3% larger than P235/60R17, a difference that falls outside the ±3% guideline commonly used when comparing tire sizes.