Double Coin REM-6 – Radial Industrial Lug OTR Tire for Forklifts, Cranes & Port Equipment
The Double Coin REM-6 radial industrial OTR tire is engineered for industrial lug, crane, and port applications, delivering the stability, traction, and wear resistance that heavy industrial equipment demands in the most unforgiving operating environments. Available at NeoTires.com in sizes ranging from 7.00R12 through 14.00R24, the REM-6 is trusted by port operators, industrial facility managers, and crane operators who need a tire that performs reliably under sustained heavy loads, frequent directional changes, and the punishing surfaces of dock yards, container terminals, and industrial warehouse environments.
Flat Wide Tread Face – Maximum Performance and Wear
The defining engineering feature of the Double Coin REM-6 is its flat, wide tread face — a design specifically chosen for industrial forklift and crane applications where the tire spends the majority of its life under maximum static and dynamic load. The flat tread face provides maximum performance and wear by keeping the entire tread width in even contact with the floor or ground surface at all times, regardless of the load weight bearing down on it. Unlike rounded tread profiles that concentrate load at the center and cause accelerated center wear, the REM-6's flat face distributes load evenly across the full tread width — significantly extending tread life and reducing the cost per operating hour in high-cycle industrial applications.
Key Features of the Double Coin REM-6
- Flat, Wide Tread Face – Provides maximum performance and even wear by maintaining full-width ground contact under heavy industrial loads, extending service life and reducing replacement frequency
- Special Cool-Running Tread Compound – Engineered with special tread compounds to run cool, reducing heat buildup during continuous operation cycles in warehouses, ports, and industrial facilities where tires are in near-constant use
- Rapid Wear Resistance – Fights rapid wear in the abrasive concrete, asphalt, and steel-plate surfaces common in industrial and port environments, delivering significantly longer service life than conventional industrial tires
- Optimum Stability & Reduced Lateral Movement – Designed for optimum stability and reduced lateral movement — critical for crane and forklift safety when carrying heavy loads at height or navigating tight industrial corridors and dock areas
- Radial Construction – Radial design delivers optimum performance and traction in industrial applications, providing a larger, more consistent contact patch than bias-ply alternatives for better load distribution and surface grip
- Industrial Lug Tread Pattern – Purpose-built lug design delivers the traction needed for industrial surfaces including smooth warehouse floors, container yard pavement, dock plates, and outdoor port surfaces
- Wide Size Range – Wide size range offers optimum stability and reduced lateral movement in a wide variety of applications, covering everything from compact indoor forklifts through large-capacity crane and port equipment
- Tubeless (TL) Construction – Tubeless design simplifies maintenance and reduces the risk of sudden deflation during operation, minimizing unplanned equipment downtime in high-productivity environments
- High Load Capacity – Engineered for the extreme static and dynamic loads of heavy industrial equipment, with load ratings supporting fully loaded forklifts, reach stackers, container handlers, and port cranes
Cool-Running Compound – Built for Continuous Industrial Duty
In industrial and port environments, tires rarely get a rest. Forklifts run continuous shifts, port cranes cycle endlessly, and reach stackers move from container to container without pause. This constant operation generates significant heat inside the tire casing — and heat is the primary cause of compound degradation, casing failure, and blowouts in industrial tire applications. The Double Coin REM-6's special cool-running tread compound is specifically formulated to manage heat generation at the molecular level, dissipating thermal energy more efficiently than standard compounds and keeping casing temperatures within safe operating ranges even during extended continuous-duty cycles. The result is a tire that lasts longer, fails less often, and keeps your industrial equipment productive through the longest shifts.
Stability & Reduced Lateral Movement – Safety in the Most Demanding Positions
In crane and forklift applications, lateral tire stability is not just a performance metric — it's a safety imperative. A tire that allows excessive lateral movement under load can compromise the stability of the load being carried, increase the risk of tip-over incidents, and create unpredictable handling behavior in tight industrial spaces. The REM-6's flat wide tread face, radial construction, and wide size range work together to deliver the lateral rigidity and load-bearing stability that crane and forklift operators depend on for safe, controlled operation in the most demanding industrial positions.
REM-6 vs. REM-2S & REM-8 – Choosing the Right Double Coin OTR Tire
Double Coin's REM lineup covers a broad range of OTR applications, each engineered for a specific use case. The REM-2S and REM-8 are motor grader tires — rib and lug patterns respectively for road construction and maintenance. The REM-6 occupies an entirely different application category: industrial equipment operating on structured surfaces in ports, warehouses, container yards, and crane facilities. Where grader tires prioritize field traction and cut resistance, the REM-6 prioritizes flat-face wear, cool-running performance, and lateral stability under sustained heavy vertical loads in continuous-duty industrial cycles. If your equipment operates on structured industrial surfaces rather than open terrain, the REM-6 is the correct Double Coin OTR tire.
Ideal Applications for the Double Coin REM-6
The REM-6 is the right tire for heavy industrial equipment operating across a wide range of facility and port environments, including counterbalance forklifts, reach stackers, empty and laden container handlers, rubber-tired gantry (RTG) cranes, port terminal tractors, industrial yard trucks, warehouse heavy lift equipment, and comparable machinery operating on concrete, asphalt, dock plates, and port terminal surfaces. Its wide size range ensures coverage across equipment classes from compact indoor forklifts through the largest port crane configurations.
Order the Double Coin REM-6 at NeoTires.com
At NeoTires.com, we carry the Double Coin REM-6 across the full size range from 7.00R12 through 14.00R24, covering the complete spectrum of industrial forklift, crane, and port equipment tire requirements. Our industrial OTR tire specialists are ready to help you identify the correct size and load rating for your specific equipment and confirm availability. Contact us today for volume pricing, fleet programs, and fast shipping to your facility or port terminal.
Product Specifications
- Brand: Double Coin
- Model: REM-6
- Type: Radial Industrial Lug OTR Tire
- Tread Pattern: Industrial Lug (IND)
- Tread Face: Flat, Wide
- Compound: Special Cool-Running Wear-Resistant Tread Compound
- Construction: Radial
- Design: Tubeless (TL)
- Application: Forklift / Crane / Port Equipment / Industrial Yard
- Category: OTR / Industrial Equipment
- Available Sizes: 7.00R12, 8.25R15, 8.25R20, 10.00R20, 11.00R20, 12.00R20, 14.00R20, 14.00R24
- Max Speed: A5 (25 km/h / 15 mph) — industrial duty rated
- Compatible Equipment: Counterbalance Forklifts, Reach Stackers, Container Handlers, RTG Cranes, Port Terminal Tractors, Industrial Yard Trucks
Double Coin REM-6 – Radial Industrial Lug OTR Tire for Forklifts, Cranes & Port Equipment
The Double Coin REM-6 radial industrial OTR tire is engineered for industrial lug, crane, and port applications, delivering the stability, traction, and wear resistance that heavy industrial equipment demands in the most unforgiving operating environments. Available at NeoTires.com in sizes ranging from 7.00R12 through 14.00R24, the REM-6 is trusted by port operators, industrial facility managers, and crane operators who need a tire that performs reliably under sustained heavy loads, frequent directional changes, and the punishing surfaces of dock yards, container terminals, and industrial warehouse environments.
Flat Wide Tread Face – Maximum Performance and Wear
The defining engineering feature of the Double Coin REM-6 is its flat, wide tread face — a design specifically chosen for industrial forklift and crane applications where the tire spends the majority of its life under maximum static and dynamic load. The flat tread face provides maximum performance and wear by keeping the entire tread width in even contact with the floor or ground surface at all times, regardless of the load weight bearing down on it. Unlike rounded tread profiles that concentrate load at the center and cause accelerated center wear, the REM-6's flat face distributes load evenly across the full tread width — significantly extending tread life and reducing the cost per operating hour in high-cycle industrial applications.
Key Features of the Double Coin REM-6
- Flat, Wide Tread Face – Provides maximum performance and even wear by maintaining full-width ground contact under heavy industrial loads, extending service life and reducing replacement frequency
- Special Cool-Running Tread Compound – Engineered with special tread compounds to run cool, reducing heat buildup during continuous operation cycles in warehouses, ports, and industrial facilities where tires are in near-constant use
- Rapid Wear Resistance – Fights rapid wear in the abrasive concrete, asphalt, and steel-plate surfaces common in industrial and port environments, delivering significantly longer service life than conventional industrial tires
- Optimum Stability & Reduced Lateral Movement – Designed for optimum stability and reduced lateral movement — critical for crane and forklift safety when carrying heavy loads at height or navigating tight industrial corridors and dock areas
- Radial Construction – Radial design delivers optimum performance and traction in industrial applications, providing a larger, more consistent contact patch than bias-ply alternatives for better load distribution and surface grip
- Industrial Lug Tread Pattern – Purpose-built lug design delivers the traction needed for industrial surfaces including smooth warehouse floors, container yard pavement, dock plates, and outdoor port surfaces
- Wide Size Range – Wide size range offers optimum stability and reduced lateral movement in a wide variety of applications, covering everything from compact indoor forklifts through large-capacity crane and port equipment
- Tubeless (TL) Construction – Tubeless design simplifies maintenance and reduces the risk of sudden deflation during operation, minimizing unplanned equipment downtime in high-productivity environments
- High Load Capacity – Engineered for the extreme static and dynamic loads of heavy industrial equipment, with load ratings supporting fully loaded forklifts, reach stackers, container handlers, and port cranes
Cool-Running Compound – Built for Continuous Industrial Duty
In industrial and port environments, tires rarely get a rest. Forklifts run continuous shifts, port cranes cycle endlessly, and reach stackers move from container to container without pause. This constant operation generates significant heat inside the tire casing — and heat is the primary cause of compound degradation, casing failure, and blowouts in industrial tire applications. The Double Coin REM-6's special cool-running tread compound is specifically formulated to manage heat generation at the molecular level, dissipating thermal energy more efficiently than standard compounds and keeping casing temperatures within safe operating ranges even during extended continuous-duty cycles. The result is a tire that lasts longer, fails less often, and keeps your industrial equipment productive through the longest shifts.
Stability & Reduced Lateral Movement – Safety in the Most Demanding Positions
In crane and forklift applications, lateral tire stability is not just a performance metric — it's a safety imperative. A tire that allows excessive lateral movement under load can compromise the stability of the load being carried, increase the risk of tip-over incidents, and create unpredictable handling behavior in tight industrial spaces. The REM-6's flat wide tread face, radial construction, and wide size range work together to deliver the lateral rigidity and load-bearing stability that crane and forklift operators depend on for safe, controlled operation in the most demanding industrial positions.
REM-6 vs. REM-2S & REM-8 – Choosing the Right Double Coin OTR Tire
Double Coin's REM lineup covers a broad range of OTR applications, each engineered for a specific use case. The REM-2S and REM-8 are motor grader tires — rib and lug patterns respectively for road construction and maintenance. The REM-6 occupies an entirely different application category: industrial equipment operating on structured surfaces in ports, warehouses, container yards, and crane facilities. Where grader tires prioritize field traction and cut resistance, the REM-6 prioritizes flat-face wear, cool-running performance, and lateral stability under sustained heavy vertical loads in continuous-duty industrial cycles. If your equipment operates on structured industrial surfaces rather than open terrain, the REM-6 is the correct Double Coin OTR tire.
Ideal Applications for the Double Coin REM-6
The REM-6 is the right tire for heavy industrial equipment operating across a wide range of facility and port environments, including counterbalance forklifts, reach stackers, empty and laden container handlers, rubber-tired gantry (RTG) cranes, port terminal tractors, industrial yard trucks, warehouse heavy lift equipment, and comparable machinery operating on concrete, asphalt, dock plates, and port terminal surfaces. Its wide size range ensures coverage across equipment classes from compact indoor forklifts through the largest port crane configurations.
Order the Double Coin REM-6 at NeoTires.com
At NeoTires.com, we carry the Double Coin REM-6 across the full size range from 7.00R12 through 14.00R24, covering the complete spectrum of industrial forklift, crane, and port equipment tire requirements. Our industrial OTR tire specialists are ready to help you identify the correct size and load rating for your specific equipment and confirm availability. Contact us today for volume pricing, fleet programs, and fast shipping to your facility or port terminal.
Product Specifications
- Brand: Double Coin
- Model: REM-6
- Type: Radial Industrial Lug OTR Tire
- Tread Pattern: Industrial Lug (IND)
- Tread Face: Flat, Wide
- Compound: Special Cool-Running Wear-Resistant Tread Compound
- Construction: Radial
- Design: Tubeless (TL)
- Application: Forklift / Crane / Port Equipment / Industrial Yard
- Category: OTR / Industrial Equipment
- Available Sizes: 7.00R12, 8.25R15, 8.25R20, 10.00R20, 11.00R20, 12.00R20, 14.00R20, 14.00R24
- Max Speed: A5 (25 km/h / 15 mph) — industrial duty rated
- Compatible Equipment: Counterbalance Forklifts, Reach Stackers, Container Handlers, RTG Cranes, Port Terminal Tractors, Industrial Yard Trucks
