ITP Cryptid Mud Tire for ATVs & UTVs
Made for bottomless mud and backwoods bogging, the ITP Cryptid turns throttle into forward bite when the trail disappears under water. Its directional, high-void tread grabs and flings muck for quick cleanout, keeping the lugs engaged. A reinforced carcass with protective shoulders helps shrug off rocks, roots, and ruts, and it stays composed when you hop onto hardpack. If deep traction tops your list, this tire keeps you moving when others stall.
Key Features and Benefits
- Deep, directional lugs deliver relentless drive in mud, clay, and swampy terrain.
- Wide voids and open channels shed muck fast to prevent packing.
- Reinforced shoulders help guard the sidewall and bead against cuts and pinch flats.
- Stout carcass supports modern ATV and UTV loads, even with accessories.
- Stabilized center elements aid tracking when you transition to hardpack.
- Rim protector profile helps shield wheel lips in rocky ruts.
The payoff is confident traction when conditions are at their worst, with manners that remain predictable on connectors and the ride back to camp.
Sizes and Fitment Guide
ITP Cryptid sizes cover popular ATV and UTV fitments, including 27x10-14, 28x10-14, 30x9-14, 30x10-14, 30x11-14, and 32x10-15. Many riders choose a narrower front and wider rear to balance steering and drive. Before upsizing, check fender, A-arm, and CV boot clearance at full compression and lock to lock, and plan for clutching or gearing changes on larger diameters. Match tire size to wheel width and offset, and follow your manual for load and inflation.
Popular 30-inch Setups
A proven 30-inch combo is 30x9-14 fronts for crisp turn-in with 30x11-14 rears for added footprint and traction. A square setup with 30x10-14 at all four corners simplifies rotation and keeps handling consistent. If you are stepping up from stock, verify clearance at full bump and confirm your clutch or gearing can handle the added mass, especially with passengers or gear.
Weight and Specs by Popular Sizes
Mud tires run heavier than all-terrain designs. A typical 30x10-14 ITP Cryptid often falls in the 41 to 43 lb range, while a 28x10-14 is usually in the mid 30s and a 32x10-15 can reach the mid 40s. Mounted diameter varies with wheel width, load, and pressure, so a 30-inch size may measure a touch under, around 29.5 inches at common off-road pressures. Always verify the published specs for the exact size you plan to buy.
Pricing and How to Buy
Pricing depends on size and stock levels, with larger and wider options costing more. Watch for seasonal promotions or wheel and tire bundles for added value. Select your size, choose the correct quantity for front and rear, then pick installation or ship to home at checkout. If you are unsure about fitment, our team can confirm clearance and gearing before you order.
Rider Feedback and Reviews
Owners praise the ITP Cryptid for its ability to churn through deep mud, ruts, and water crossings where milder treads stall out. The aggressive lugs clean quickly and keep driving. Expect a firmer feel and more tread feedback on hardpack than an all-terrain tire, a fair trade for maximum mud traction. Many note that measured height can run slightly short at lower pressures, so set psi carefully to dial in stance and ride.
ITP Cryptid vs Other Mud Tires
Versus ultra-extreme mud tires, the Cryptid balances deep-mud bite with predictable trail manners. Some paddle-like designs may edge it in the nastiest pits, but they often weigh more and feel harsher on firm ground. Hybrid all-terrain options usually ride smoother and save weight, yet they give up forward bite and self-cleaning in real gumbo. If you want dependable traction in serious mud without going to a single-purpose paddle, the ITP Cryptid hits a smart middle ground.