Rims not included with purchase of tires
Vogue Custom Built Radial SCT2 305/35R24 112H
12% off
$597.86
was $679.39
Total savings on 4 tires: $326.12
Estimated delivery time: 2 days
Free shipping!
Enter zip code
You're viewing new Vogue Custom Built Radial SCT2 Tire | 305/35R24 | XL | Manufacturer Part No 03213241.
Vogue Custom Built Radial SCT2
The Vogue Custom Built Radial SCT2 is a radial drive tire designed for mixed-service, vocational use where traction and stability matter across changing surfaces. Its open-shoulder tread layout is intended to help clear loose material while maintaining a confident footprint under load. The Red Stripe sidewall detail supports a custom appearance without changing the core purpose of the tire. Use this page to review fitment options, practical features, and purchase considerations for the SCT2.
Vogue Custom Built Radial SCT2 Features and Tread Design
The Vogue Custom Built Radial SCT2 is built around an open-shoulder tread concept that prioritizes drive-axle grip in mixed-service conditions. Open shoulder voids are commonly chosen to help release gravel, dirt, and other loose material, reducing the tendency to pack up when the route transitions off pavement. The tread pattern is also designed to deliver stable contact on hard surfaces, supporting consistent handling during starts, stops, and low-speed maneuvering.
The Red Stripe sidewall treatment is a styling detail often selected for custom builds, but it does not change the tire’s fundamental role. For shoppers focused on function first, the key takeaway is that the SCT2 is intended for drive service with an all-around, jobsite-capable tread layout.
Radial Construction and What It Means for Durability
The Vogue Custom Built Radial SCT2 uses radial construction, which is a common choice for modern drive tires due to its balance of ride quality, heat management, and tread stability. In practical terms, a radial design is typically selected to support controlled flex through the casing while maintaining a flatter tread footprint on the road.
For mixed-service operation, durability is influenced by proper application, maintenance, and avoiding mismatched fitment as much as by the tire’s basic build. The SCT2 is meant to be used as a drive-position tire, where traction demands can be higher and surface conditions can vary. To protect the casing and tread, match the tire to the correct wheel width, keep inflation consistent, and address alignment or suspension wear early.
Intended Use: Mixed-Service Drive Applications
The Vogue Custom Built Radial SCT2 is intended for drive position use in mixed-service or vocational duty cycles. This is the kind of work where a vehicle may spend time on pavement and also operate on uneven, loose, or debris-prone surfaces. An open-shoulder drive tread is often chosen in these scenarios to help maintain forward bite and reduce wheel slip when conditions change.
This tire is best evaluated by your real route, how frequently you leave paved roads, and how much traction you need during acceleration and climbing. If your operation includes frequent turning on abrasive surfaces, consider how an open shoulder design may be affected by scrub. When traction is the priority for drive service, the SCT2’s layout aligns with that need.
Available Sizes and Fitment for the Custom Built Radial SCT2
This page covers the Vogue Custom Built Radial SCT2 in three approved sizes: 275/55R20, 285/45R22, and 305/35R24. Fitment should be confirmed using the full tire size, the vehicle placard or build sheet where applicable, and the wheel specifications. Because these sizes are commonly associated with custom wheel setups, checking wheel width compatibility and fender clearance is especially important.
When selecting between sizes, keep overall diameter and section width in mind, as changes can affect clearance, gearing behavior, and speedometer accuracy. If you are matching tires across a drive axle, it is typically best practice to keep size, tread depth, and inflation consistent side-to-side to support stable driveline behavior.
Vogue Custom Built Radial SCT2 Pricing and Buying Considerations
If you are shopping for Vogue Custom Built Radial SCT2 pricing, start by confirming the exact size you need, then compare current listings based on availability in that fitment. Tire cost can vary by size and by inventory timing, so checking multiple sources for the same specification can help you make a like-for-like comparison.
Before purchasing, verify that the tire is intended for drive position use in a mixed-service environment, and confirm that your wheel and vehicle setup support the chosen size. If you are replacing a pair on a drive axle, plan to match both tires to the same size and similar wear level. Also confirm delivery timing and return policies, since fitment errors are easier to correct before mounting.
Vogue Custom Built Radial SCT2 vs Vogue Custom Built Radial VIII
Comparing the Vogue Custom Built Radial SCT2 vs Vogue Custom Built Radial VIII often comes down to intended tread behavior and the type of surfaces you encounter. The SCT2, as presented here, aligns with a drive-position, open-shoulder approach that is typically chosen when loose-surface traction is an important part of the job.
When evaluating the Vogue Custom Built Radial VIII, focus on whether its tread layout and intended use better match your operation, especially if your routes are primarily paved or if you have different priorities for noise, appearance, or surface interaction. The most reliable way to choose between them is to match the tire’s position intent and tread pattern to your real duty cycle, then confirm the correct size and clearance.
Recommendations and practical tips
The Vogue Custom Built Radial SCT2 is typically recommended for drivers who need a radial drive tire for mixed-service, vocational use and want an open-shoulder tread style to help manage loose or changing surfaces. It is also often chosen by owners building a custom look, where the Red Stripe sidewall detail matters, but the tire still needs to serve a practical drive-position role. Fitment is best for applications that can accommodate the approved sizes and have clearance verified in advance.
When we recommend it:
- When you need a drive-position tire with an open-shoulder tread for mixed-service routes
- When your work involves transitioning between pavement and loose surfaces where self-cleaning voids are helpful
- When you want Red Stripe styling without moving away from a drive-duty tread concept
- When you can confirm wheel width and clearance for one of the approved sizes
When to consider other options:
- If your use is primarily highway-only and you prefer a more closed-shoulder style
- If your application requires a different axle position than drive
- If you cannot confirm clearance, wheel width compatibility, or matching tires on the axle
Expert tips:
- Confirm the full size code and wheel specifications before ordering, especially on custom wheel setups
- On a drive axle, keep left and right tires matched in size and similar tread depth to reduce driveline stress
- If you change overall diameter, plan for possible speedometer and clearance implications
- If you frequently operate on abrasive surfaces, inspect shoulders often, as open-shoulder designs can show scrub wear sooner
Usage and care tips:
- Check inflation regularly and adjust to the vehicle and load requirements
- Inspect for cuts, chips, and embedded debris after mixed-surface use
- Rotate or move tires only in ways appropriate for a drive-position setup and your vehicle configuration
- Address alignment and suspension issues promptly to avoid irregular wear
Help Choosing the Right SCT2 Setup
We recommend the Vogue Custom Built Radial SCT2 for drivers who want a drive-position tire aimed at mixed-service use and prefer an open-shoulder tread approach for changing surfaces. It is also a practical choice when you want the Red Stripe look without losing sight of the tire’s intended job. Because the listed sizes are common in custom wheel setups, a quick fitment check can prevent clearance and matching issues on the drive axle.
Best fit scenarios:
- You need a drive-position tire for mixed-service routes that include both pavement and loose surfaces
- Your work involves frequent starts, stops, and low-speed maneuvering where stable contact matters
- You want an open-shoulder tread style that can help manage debris-prone surfaces
- You are building a custom appearance and specifically want the Red Stripe sidewall detail
- You are selecting from the available sizes, 275/55R20, 285/45R22, or 305/35R24, and can confirm wheel and clearance requirements
When to pause and check fitment:
- You are unsure whether this tire is appropriate for your axle position, it is intended for drive service
- You are running a custom wheel setup and have not confirmed wheel width compatibility and fender or suspension clearance
- You are replacing only one tire on a drive axle, mismatched size or tread depth can cause issues
- You are changing overall diameter from your current setup and want to avoid speedometer and clearance surprises
Why customers trust NeoTires:
- NeoTires tire experts are available via chat, phone, or text to confirm size and drive-position intent
- Personalized guidance based on your route, surface conditions, and whether you are matching a pair on the axle
- Support for multi-tire and fleet-style orders, including coordination on delivery timing
- Clear, practical comparison help if you are weighing the SCT2 against other Vogue options
- Proactive communication through ordering and delivery coordination
Confirm fitment before you order
Send us your tire size and wheel details, and we will help you confirm clearance and the right drive-axle match for your setup.
Actions:
Get help choosing between available sizes
If you are deciding between 275/55R20, 285/45R22, and 305/35R24, we can walk through the practical tradeoffs and what changes for your vehicle.
Actions:
Request a quote for pairs or multiple tires
For matched drive-axle replacements or multi-tire orders, we can confirm availability and coordinate delivery that fits your schedule.
Actions:
Vogue Custom Built Radial SCT2
The Vogue Custom Built Radial SCT2 is a radial drive tire designed for mixed-service, vocational use where traction and stability matter across changing surfaces. Its open-shoulder tread layout is intended to help clear loose material while maintaining a confident footprint under load. The Red Stripe sidewall detail supports a custom appearance without changing the core purpose of the tire. Use this page to review fitment options, practical features, and purchase considerations for the SCT2.
Vogue Custom Built Radial SCT2 Features and Tread Design
The Vogue Custom Built Radial SCT2 is built around an open-shoulder tread concept that prioritizes drive-axle grip in mixed-service conditions. Open shoulder voids are commonly chosen to help release gravel, dirt, and other loose material, reducing the tendency to pack up when the route transitions off pavement. The tread pattern is also designed to deliver stable contact on hard surfaces, supporting consistent handling during starts, stops, and low-speed maneuvering.
The Red Stripe sidewall treatment is a styling detail often selected for custom builds, but it does not change the tire’s fundamental role. For shoppers focused on function first, the key takeaway is that the SCT2 is intended for drive service with an all-around, jobsite-capable tread layout.
Radial Construction and What It Means for Durability
The Vogue Custom Built Radial SCT2 uses radial construction, which is a common choice for modern drive tires due to its balance of ride quality, heat management, and tread stability. In practical terms, a radial design is typically selected to support controlled flex through the casing while maintaining a flatter tread footprint on the road.
For mixed-service operation, durability is influenced by proper application, maintenance, and avoiding mismatched fitment as much as by the tire’s basic build. The SCT2 is meant to be used as a drive-position tire, where traction demands can be higher and surface conditions can vary. To protect the casing and tread, match the tire to the correct wheel width, keep inflation consistent, and address alignment or suspension wear early.
Intended Use: Mixed-Service Drive Applications
The Vogue Custom Built Radial SCT2 is intended for drive position use in mixed-service or vocational duty cycles. This is the kind of work where a vehicle may spend time on pavement and also operate on uneven, loose, or debris-prone surfaces. An open-shoulder drive tread is often chosen in these scenarios to help maintain forward bite and reduce wheel slip when conditions change.
This tire is best evaluated by your real route, how frequently you leave paved roads, and how much traction you need during acceleration and climbing. If your operation includes frequent turning on abrasive surfaces, consider how an open shoulder design may be affected by scrub. When traction is the priority for drive service, the SCT2’s layout aligns with that need.
Available Sizes and Fitment for the Custom Built Radial SCT2
This page covers the Vogue Custom Built Radial SCT2 in three approved sizes: 275/55R20, 285/45R22, and 305/35R24. Fitment should be confirmed using the full tire size, the vehicle placard or build sheet where applicable, and the wheel specifications. Because these sizes are commonly associated with custom wheel setups, checking wheel width compatibility and fender clearance is especially important.
When selecting between sizes, keep overall diameter and section width in mind, as changes can affect clearance, gearing behavior, and speedometer accuracy. If you are matching tires across a drive axle, it is typically best practice to keep size, tread depth, and inflation consistent side-to-side to support stable driveline behavior.
Vogue Custom Built Radial SCT2 Pricing and Buying Considerations
If you are shopping for Vogue Custom Built Radial SCT2 pricing, start by confirming the exact size you need, then compare current listings based on availability in that fitment. Tire cost can vary by size and by inventory timing, so checking multiple sources for the same specification can help you make a like-for-like comparison.
Before purchasing, verify that the tire is intended for drive position use in a mixed-service environment, and confirm that your wheel and vehicle setup support the chosen size. If you are replacing a pair on a drive axle, plan to match both tires to the same size and similar wear level. Also confirm delivery timing and return policies, since fitment errors are easier to correct before mounting.
Vogue Custom Built Radial SCT2 vs Vogue Custom Built Radial VIII
Comparing the Vogue Custom Built Radial SCT2 vs Vogue Custom Built Radial VIII often comes down to intended tread behavior and the type of surfaces you encounter. The SCT2, as presented here, aligns with a drive-position, open-shoulder approach that is typically chosen when loose-surface traction is an important part of the job.
When evaluating the Vogue Custom Built Radial VIII, focus on whether its tread layout and intended use better match your operation, especially if your routes are primarily paved or if you have different priorities for noise, appearance, or surface interaction. The most reliable way to choose between them is to match the tire’s position intent and tread pattern to your real duty cycle, then confirm the correct size and clearance.
Recommendations and practical tips
The Vogue Custom Built Radial SCT2 is typically recommended for drivers who need a radial drive tire for mixed-service, vocational use and want an open-shoulder tread style to help manage loose or changing surfaces. It is also often chosen by owners building a custom look, where the Red Stripe sidewall detail matters, but the tire still needs to serve a practical drive-position role. Fitment is best for applications that can accommodate the approved sizes and have clearance verified in advance.
When we recommend it:
- When you need a drive-position tire with an open-shoulder tread for mixed-service routes
- When your work involves transitioning between pavement and loose surfaces where self-cleaning voids are helpful
- When you want Red Stripe styling without moving away from a drive-duty tread concept
- When you can confirm wheel width and clearance for one of the approved sizes
When to consider other options:
- If your use is primarily highway-only and you prefer a more closed-shoulder style
- If your application requires a different axle position than drive
- If you cannot confirm clearance, wheel width compatibility, or matching tires on the axle
Expert tips:
- Confirm the full size code and wheel specifications before ordering, especially on custom wheel setups
- On a drive axle, keep left and right tires matched in size and similar tread depth to reduce driveline stress
- If you change overall diameter, plan for possible speedometer and clearance implications
- If you frequently operate on abrasive surfaces, inspect shoulders often, as open-shoulder designs can show scrub wear sooner
Usage and care tips:
- Check inflation regularly and adjust to the vehicle and load requirements
- Inspect for cuts, chips, and embedded debris after mixed-surface use
- Rotate or move tires only in ways appropriate for a drive-position setup and your vehicle configuration
- Address alignment and suspension issues promptly to avoid irregular wear
Help Choosing the Right SCT2 Setup
We recommend the Vogue Custom Built Radial SCT2 for drivers who want a drive-position tire aimed at mixed-service use and prefer an open-shoulder tread approach for changing surfaces. It is also a practical choice when you want the Red Stripe look without losing sight of the tire’s intended job. Because the listed sizes are common in custom wheel setups, a quick fitment check can prevent clearance and matching issues on the drive axle.
Best fit scenarios:
- You need a drive-position tire for mixed-service routes that include both pavement and loose surfaces
- Your work involves frequent starts, stops, and low-speed maneuvering where stable contact matters
- You want an open-shoulder tread style that can help manage debris-prone surfaces
- You are building a custom appearance and specifically want the Red Stripe sidewall detail
- You are selecting from the available sizes, 275/55R20, 285/45R22, or 305/35R24, and can confirm wheel and clearance requirements
When to pause and check fitment:
- You are unsure whether this tire is appropriate for your axle position, it is intended for drive service
- You are running a custom wheel setup and have not confirmed wheel width compatibility and fender or suspension clearance
- You are replacing only one tire on a drive axle, mismatched size or tread depth can cause issues
- You are changing overall diameter from your current setup and want to avoid speedometer and clearance surprises
Why customers trust NeoTires:
- NeoTires tire experts are available via chat, phone, or text to confirm size and drive-position intent
- Personalized guidance based on your route, surface conditions, and whether you are matching a pair on the axle
- Support for multi-tire and fleet-style orders, including coordination on delivery timing
- Clear, practical comparison help if you are weighing the SCT2 against other Vogue options
- Proactive communication through ordering and delivery coordination
Confirm fitment before you order
Send us your tire size and wheel details, and we will help you confirm clearance and the right drive-axle match for your setup.
Actions:
Get help choosing between available sizes
If you are deciding between 275/55R20, 285/45R22, and 305/35R24, we can walk through the practical tradeoffs and what changes for your vehicle.
Actions:
Request a quote for pairs or multiple tires
For matched drive-axle replacements or multi-tire orders, we can confirm availability and coordinate delivery that fits your schedule.
Actions:
Do you have a question about Custom Built Radial SCT2 305/35R24 112H?
Yes. The Vogue Custom Built Radial SCT2 on this page is offered in 275/55R20. Before you buy, confirm that your wheel width and vehicle clearances support that size, since both section width and overall diameter affect fit. Also verify that you are selecting this tire for a drive-position application, because tread designs and construction are chosen based on axle role and duty cycle. If you are installing two tires on the same drive axle, it is typically best to replace as a matching pair in the same size and with similar tread depth.
The Vogue Custom Built Radial SCT2 is available in 285/45R22, and it is intended for drive-position use within mixed-service operation. The key is confirming your exact fitment requirements, including wheel width compatibility, brake and suspension clearance, and whether the overall diameter change is acceptable for your setup. If you are mixing sizes or replacing only one tire on a drive axle, be cautious, mismatched diameters and uneven tread depth can create handling issues and added stress on drivetrain components. When in doubt, confirm fitment details before mounting.
Start with clearance. 305/35R24 is a wide fitment, so confirm there is adequate room at full steering lock and through suspension travel, even if the tire is used on a drive axle. Next, verify wheel width compatibility so the tire is supported correctly. Also consider overall diameter versus your current setup, as changes can affect speedometer behavior and gearing feel. Finally, confirm you can keep both tires on the drive axle matched in the same size and comparable tread depth. These checks help reduce the risk of rubbing, uneven wear, or driveline concerns.
No. “Red Stripe” is a variant descriptor that refers to the sidewall styling, not a separate tire model. The underlying model name remains Vogue Custom Built Radial SCT2. When shopping, focus on confirming the exact size and intended axle position first, since those determine fitment and proper application. Then verify that the listing specifies the Red Stripe styling if appearance is important for your build. If you see small wording differences across sellers, use the full model name and the tire size code to ensure you are comparing the same SCT2 configuration.
The Vogue Custom Built Radial SCT2 is intended for use in the drive position, where traction demands are typically higher and surfaces can vary in mixed-service work. In a drive setup, it is generally best practice to run matched tires across the axle, meaning the same size and a similar tread depth, with inflation kept consistent. If your vehicle uses multiple drive axles, keep sizing consistent across those axles unless your configuration specifically calls for a staggered approach. For best results, confirm that your application truly calls for a drive tire and not a different axle role.
When comparing Vogue Custom Built Radial SCT2 vs Vogue Custom Built Radial VIII, begin with your duty cycle and the surfaces you operate on. The SCT2 is positioned around a drive-oriented, open-shoulder concept for mixed-service traction. If the alternative model has a different tread style or intended use, it may prioritize different tradeoffs such as surface interaction or wear behavior. Keep the comparison practical by matching both options in the same size, confirming axle position intent, and checking clearance and wheel specs. If appearance is a priority, confirm sidewall styling separately from functional requirements.
