Rims not included with purchase of tires
Cooper Evolution MT 33X12.50R15LT/6
You're viewing new Cooper Evolution MT Tire | 33X12.50R15LT | C | Manufacturer Part No 170167035.
Cooper Evolution MT
The Cooper Evolution MT is a radial mud-terrain tire built around an open-shoulder tread pattern for traction-focused mixed-service work. It is typically selected for drive-position use where surfaces can vary from hardpack and gravel to loose dirt and mud. This model emphasizes a durable, blocky tread layout with void space that helps clear debris in low-traction conditions. Use the information below to confirm the right size, construction details, and application fit before you buy.
Cooper Evolution MT Key Features and Tread Design
Cooper Evolution MT uses an open-shoulder, mud-terrain tread layout designed to bite into loose surfaces and evacuate mud and small debris through larger void areas. The tread blocks are arranged to create multiple traction edges, which is commonly valued in mixed-service work where grip needs change quickly across dirt, gravel, and uneven ground.
As with most mud-terrain patterns, the design prioritizes off-road traction and self-cleaning over quiet operation on pavement. If your priority is a tread that stays engaged in softer terrain while still being usable on-road between job sites, the overall tread geometry of the Cooper Evolution MT is aligned with that use case.
Intended Application for Mixed-Service Drive Use
The Cooper Evolution MT is positioned for mixed-service environments where vehicles see a combination of on-road travel and off-road work conditions. It is generally a fit for drive-position needs where traction under load, pull through softer surfaces, and consistent engagement on uneven terrain are important.
Open-shoulder mud-terrain tires like the Cooper Evolution MT are often chosen for job sites, unimproved roads, and seasonal conditions where mud and loose material are common. If most of your miles are steady highway cruising with a focus on low noise and smoother ride characteristics, a less aggressive tread category is typically a better match than a mud-terrain design.
Cooper Evolution MT Sizes and Fitment Options
Cooper Evolution MT is offered in a wide range of approved sizes to support common mixed-service fitments. Confirm your required load and clearance requirements before selecting a size, especially if you are moving up in overall diameter or section width.
Approved sizes include: 2.50-15, 265/70R17, 265/75R16, 275/70R18, 285/70R17, 285/75R16, 295/70R17, 295/70R18, 31x10.50-15, 31X10.50R15, 31X10.50R15LT, 33x12.50-15, 33X12.50R15, 33X12.50R15LT, 35x12.50-15, 35x12.50-17, 35x12.50-20, 35X12.50R15, 35X12.50R15LT, 35X12.50R17, 35X12.50R17LT, 35X12.50R20, 35x12.50R20LT, LT265/70R17, LT265/75R16, LT275/70R18, LT285/70R17, LT285/75R16, LT295/70R17, LT295/70R18, LT31X10.50R15, LT33X12.50R15, LT35X12.50R20.
Construction, Sidewall Considerations, and Spec Sheet Details
The Cooper Evolution MT is a radial tire, a construction type commonly chosen for a balance of stability, heat management, and everyday usability across mixed-service routes. For buyers comparing options, the most important specification checks are the exact size designation, the published load and speed information for that size, and whether the casing details match your working conditions.
If you are evaluating items like ply rating, sidewall build, or a data sheet for a specific size, those details can vary by fitment. The best practice is to confirm the exact size line you plan to purchase and match it to your vehicle requirements and the demands of your typical job site surfaces.
Comparisons: Evolution MT vs STT Pro, ST Maxx, and Discoverer MT
When comparing Cooper Evolution MT vs STT Pro, focus first on how aggressive you want the tread to be for your work conditions. A more aggressive mud-terrain pattern can improve bite in softer terrain, while also tending to increase road noise and change on-road feel.
For Cooper Evolution MT vs ST Maxx, the decision often comes down to how frequently you deal with mud and loose material versus spending time on graded gravel and pavement. When looking at Cooper Evolution vs Discoverer MT, confirm that you are comparing the correct tread category and the same size, since construction details and available fitments can affect ride, durability expectations, and overall suitability for mixed-service drive use.
Recommendations and practical tips
Cooper Evolution MT is typically a strong match for drivers who need a traction-focused mud-terrain tire for mixed-service work and want an open-shoulder tread that can clear loose material. It is often chosen for vehicles that regularly transition between pavement, gravel, dirt access roads, and job site terrain where getting moving and staying moving matters most. Buyers who prioritize a quieter highway ride usually consider a less aggressive tread type.
When we recommend it:
- You need a mud-terrain pattern for frequent dirt, mud, and loose surfaces
- Your routes mix pavement with job site or unimproved-road conditions
- You want an open-shoulder tread design to help release packed material
- Drive-position traction is a primary selection priority
When to consider other options:
- Most of your driving is steady highway use and road noise is a top concern
- You rarely encounter mud or loose terrain and mainly travel on paved roads
Expert tips:
- Match the exact size designation to your wheel diameter and clearance, especially when moving to 33-inch or 35-inch fitments
- Confirm load and speed specifications for the specific size you are ordering, rather than assuming they are identical across the lineup
- If you are changing overall tire diameter, verify gearing, speedometer accuracy, and brake clearance with your installer
- Plan for a more aggressive tread to feel different on pavement than a mild all-terrain pattern
Usage and care tips:
- Maintain inflation appropriate to your vehicle and operating conditions, and recheck when temperatures change
- Rotate on a consistent schedule to help promote even wear across an aggressive tread pattern
- Inspect tread and sidewalls regularly for cuts or embedded stones after job site use
- If you notice vibration after off-road driving, check for debris packed in the tread and wheels
Help Choosing the Right Evolution MT Setup
We recommend the Cooper Evolution MT for drivers who regularly move between pavement and job site surfaces where traction-focused tread design matters. Its open-shoulder mud-terrain pattern is a practical fit when loose dirt, gravel, and mud are part of the workday, and you still need a tire you can run on-road between locations. If you are deciding between similar sizes or considering a jump to a larger diameter, our team can help confirm fitment, axle position, and the right spec checks before you order.
Best fit scenarios:
- Mixed-service routes that include dirt roads, gravel, and occasional mud
- Drive-position use where maintaining traction on uneven ground is a priority
- Vehicles that need an open-shoulder mud-terrain tread to help clear loose material
- Drivers who accept that a mud-terrain tire can feel and sound more aggressive on pavement
When to pause and check fitment:
- You are moving up to 33-inch or 35-inch sizes and need to confirm clearance at full steering lock and suspension travel
- You are choosing between similar sizes, such as 285/75R16 vs 285/70R17, and want to avoid wheel or clearance mismatches
- You need to verify load and speed specifications for the exact size you plan to purchase
- You are changing overall diameter and want to confirm speedometer, gearing, and brake clearance considerations with your installer
Why customers trust NeoTires:
- Tire experts available via chat, phone, or text to confirm size and application fit
- Support for fleet and multi-tire orders, including coordination across warehouses and delivery teams
- Practical, comparison-based guidance, focused on your routes and surfaces rather than hype
- Clear help double-checking size designation details, especially with LT and flotation sizing
Confirm Your Size Before You Buy
Send us your current tire size and vehicle details, and we will help verify the correct Evolution MT fitment and the checks that matter for your setup.
Actions:
Need Help Comparing Similar Options?
If you are weighing Evolution MT against other Cooper models, we can walk through tread category differences and size availability so you can choose confidently.
Actions:
Ordering for a Fleet or Multiple Vehicles
Tell us quantities and required sizes, and we will help coordinate sourcing and delivery for a smoother, predictable order process.
Actions:
Cooper Evolution MT
The Cooper Evolution MT is a radial mud-terrain tire built around an open-shoulder tread pattern for traction-focused mixed-service work. It is typically selected for drive-position use where surfaces can vary from hardpack and gravel to loose dirt and mud. This model emphasizes a durable, blocky tread layout with void space that helps clear debris in low-traction conditions. Use the information below to confirm the right size, construction details, and application fit before you buy.
Cooper Evolution MT Key Features and Tread Design
Cooper Evolution MT uses an open-shoulder, mud-terrain tread layout designed to bite into loose surfaces and evacuate mud and small debris through larger void areas. The tread blocks are arranged to create multiple traction edges, which is commonly valued in mixed-service work where grip needs change quickly across dirt, gravel, and uneven ground.
As with most mud-terrain patterns, the design prioritizes off-road traction and self-cleaning over quiet operation on pavement. If your priority is a tread that stays engaged in softer terrain while still being usable on-road between job sites, the overall tread geometry of the Cooper Evolution MT is aligned with that use case.
Intended Application for Mixed-Service Drive Use
The Cooper Evolution MT is positioned for mixed-service environments where vehicles see a combination of on-road travel and off-road work conditions. It is generally a fit for drive-position needs where traction under load, pull through softer surfaces, and consistent engagement on uneven terrain are important.
Open-shoulder mud-terrain tires like the Cooper Evolution MT are often chosen for job sites, unimproved roads, and seasonal conditions where mud and loose material are common. If most of your miles are steady highway cruising with a focus on low noise and smoother ride characteristics, a less aggressive tread category is typically a better match than a mud-terrain design.
Cooper Evolution MT Sizes and Fitment Options
Cooper Evolution MT is offered in a wide range of approved sizes to support common mixed-service fitments. Confirm your required load and clearance requirements before selecting a size, especially if you are moving up in overall diameter or section width.
Approved sizes include: 2.50-15, 265/70R17, 265/75R16, 275/70R18, 285/70R17, 285/75R16, 295/70R17, 295/70R18, 31x10.50-15, 31X10.50R15, 31X10.50R15LT, 33x12.50-15, 33X12.50R15, 33X12.50R15LT, 35x12.50-15, 35x12.50-17, 35x12.50-20, 35X12.50R15, 35X12.50R15LT, 35X12.50R17, 35X12.50R17LT, 35X12.50R20, 35x12.50R20LT, LT265/70R17, LT265/75R16, LT275/70R18, LT285/70R17, LT285/75R16, LT295/70R17, LT295/70R18, LT31X10.50R15, LT33X12.50R15, LT35X12.50R20.
Construction, Sidewall Considerations, and Spec Sheet Details
The Cooper Evolution MT is a radial tire, a construction type commonly chosen for a balance of stability, heat management, and everyday usability across mixed-service routes. For buyers comparing options, the most important specification checks are the exact size designation, the published load and speed information for that size, and whether the casing details match your working conditions.
If you are evaluating items like ply rating, sidewall build, or a data sheet for a specific size, those details can vary by fitment. The best practice is to confirm the exact size line you plan to purchase and match it to your vehicle requirements and the demands of your typical job site surfaces.
Comparisons: Evolution MT vs STT Pro, ST Maxx, and Discoverer MT
When comparing Cooper Evolution MT vs STT Pro, focus first on how aggressive you want the tread to be for your work conditions. A more aggressive mud-terrain pattern can improve bite in softer terrain, while also tending to increase road noise and change on-road feel.
For Cooper Evolution MT vs ST Maxx, the decision often comes down to how frequently you deal with mud and loose material versus spending time on graded gravel and pavement. When looking at Cooper Evolution vs Discoverer MT, confirm that you are comparing the correct tread category and the same size, since construction details and available fitments can affect ride, durability expectations, and overall suitability for mixed-service drive use.
Recommendations and practical tips
Cooper Evolution MT is typically a strong match for drivers who need a traction-focused mud-terrain tire for mixed-service work and want an open-shoulder tread that can clear loose material. It is often chosen for vehicles that regularly transition between pavement, gravel, dirt access roads, and job site terrain where getting moving and staying moving matters most. Buyers who prioritize a quieter highway ride usually consider a less aggressive tread type.
When we recommend it:
- You need a mud-terrain pattern for frequent dirt, mud, and loose surfaces
- Your routes mix pavement with job site or unimproved-road conditions
- You want an open-shoulder tread design to help release packed material
- Drive-position traction is a primary selection priority
When to consider other options:
- Most of your driving is steady highway use and road noise is a top concern
- You rarely encounter mud or loose terrain and mainly travel on paved roads
Expert tips:
- Match the exact size designation to your wheel diameter and clearance, especially when moving to 33-inch or 35-inch fitments
- Confirm load and speed specifications for the specific size you are ordering, rather than assuming they are identical across the lineup
- If you are changing overall tire diameter, verify gearing, speedometer accuracy, and brake clearance with your installer
- Plan for a more aggressive tread to feel different on pavement than a mild all-terrain pattern
Usage and care tips:
- Maintain inflation appropriate to your vehicle and operating conditions, and recheck when temperatures change
- Rotate on a consistent schedule to help promote even wear across an aggressive tread pattern
- Inspect tread and sidewalls regularly for cuts or embedded stones after job site use
- If you notice vibration after off-road driving, check for debris packed in the tread and wheels
Help Choosing the Right Evolution MT Setup
We recommend the Cooper Evolution MT for drivers who regularly move between pavement and job site surfaces where traction-focused tread design matters. Its open-shoulder mud-terrain pattern is a practical fit when loose dirt, gravel, and mud are part of the workday, and you still need a tire you can run on-road between locations. If you are deciding between similar sizes or considering a jump to a larger diameter, our team can help confirm fitment, axle position, and the right spec checks before you order.
Best fit scenarios:
- Mixed-service routes that include dirt roads, gravel, and occasional mud
- Drive-position use where maintaining traction on uneven ground is a priority
- Vehicles that need an open-shoulder mud-terrain tread to help clear loose material
- Drivers who accept that a mud-terrain tire can feel and sound more aggressive on pavement
When to pause and check fitment:
- You are moving up to 33-inch or 35-inch sizes and need to confirm clearance at full steering lock and suspension travel
- You are choosing between similar sizes, such as 285/75R16 vs 285/70R17, and want to avoid wheel or clearance mismatches
- You need to verify load and speed specifications for the exact size you plan to purchase
- You are changing overall diameter and want to confirm speedometer, gearing, and brake clearance considerations with your installer
Why customers trust NeoTires:
- Tire experts available via chat, phone, or text to confirm size and application fit
- Support for fleet and multi-tire orders, including coordination across warehouses and delivery teams
- Practical, comparison-based guidance, focused on your routes and surfaces rather than hype
- Clear help double-checking size designation details, especially with LT and flotation sizing
Confirm Your Size Before You Buy
Send us your current tire size and vehicle details, and we will help verify the correct Evolution MT fitment and the checks that matter for your setup.
Actions:
Need Help Comparing Similar Options?
If you are weighing Evolution MT against other Cooper models, we can walk through tread category differences and size availability so you can choose confidently.
Actions:
Ordering for a Fleet or Multiple Vehicles
Tell us quantities and required sizes, and we will help coordinate sourcing and delivery for a smoother, predictable order process.
Actions:
Do you have a question about Evolution MT 33X12.50R15LT/6 ?
Yes. The Cooper Evolution MT is commonly selected for drive-position use in mixed-service conditions where traction is a priority. Its open-shoulder, mud-terrain tread layout is designed to engage on loose surfaces and help clear mud and debris, which aligns with the demands typically placed on a drive tire. As with any tire choice, confirm the specific size specifications and application requirements for your vehicle before purchase, and avoid using it in positions or conditions not supported by your equipment guidelines.
Yes. Cooper Evolution MT is available in both 285/75R16 and 285/70R17 among its approved fitments. Even when two sizes appear similar, they differ in wheel diameter requirements and overall dimensions, which can affect clearance, speedometer accuracy, and how the vehicle feels under load. Before choosing between them, confirm your wheel size, available space at full steering lock and suspension travel, and any restrictions from your vehicle or equipment manufacturer. It is also smart to verify the published load and speed information for the exact size you plan to buy.
Yes. Cooper Evolution MT is offered in 35X12.50R17 and 35X12.50R20, along with multiple related 35-inch fitments. Moving to a 35-inch tire can require additional checks beyond just matching the wheel diameter, including fender and suspension clearance, turning clearance, and compatibility with your intended wheel width and offset. Because small fitment differences can create rubbing or handling changes, it is best to confirm the full tire and wheel package with an experienced installer and verify that your vehicle setup supports the overall dimensions you are selecting.
In general, mud-terrain tires tend to produce more audible road noise than less aggressive tread types because they use larger tread blocks and wider voids to improve off-road traction and self-cleaning. The Cooper Evolution MT follows that mud-terrain design approach, so it is reasonable to expect a more pronounced tread sound on pavement, especially as speeds increase or as the tire wears. If quieter highway behavior is a primary requirement, you may want to compare tread categories and consider whether your real-world use truly demands a mud-terrain pattern.
Cooper Evolution MT vs STT Pro comparisons usually come down to how aggressive you need the tread and how you balance off-road traction with on-road manners. Both are positioned for conditions where loose surfaces and job site terrain are part of the routine, but differences in tread aggressiveness, available sizes, and casing details by size can affect how each option fits your needs. The most reliable way to choose is to match the exact size you need, confirm the published specifications for that size, and prioritize the characteristics that matter most for your routes, such as mud performance versus day-to-day pavement behavior.
For Cooper Evolution MT specification items such as ply rating, load information, and other casing details, use the specifications published for the exact size you intend to purchase. These details can vary across the lineup, so it is important not to assume that one size shares identical construction or capacity with another. If you are buying for mixed-service drive use, focus on confirming the correct size designation, the published load and speed information, and any fitment notes tied to your vehicle or equipment requirements before ordering.
